|
|
|
The Burkey
Flatliner PRO is a powersupply which offers 9 discrete isolated outputs. |
|
The outputs may vary between 3 to 24 volt DC and 1 output varies
between 9 to 12 volt AC. |
|
(DC=direct current, AC=alternating current). |
|
|
|
What does this mean for a guitarplayer? |
|
The Burkey Flatliner
PRO
can cover all
circumstances: |
|
- 9VDC. Most pedals need this current. (9
volts battery) |
|
- Some older digital Boss pedals need
12VDC. |
|
- Fulltone ´69 and
Octafuzz do have reversed polarity
(optional cable needed) |
|
- Line 6 POD: 9VAC |
|
- Tube driven pedals very often need 12VAC |
|
- Line6 DM4 and DL4: 12VDC |
|
- Maxon reissue pedals: 9-10VDC |
|
- T-Rex Mudhoney: 9-12VDC |
|
- Fulltone OCD and Fat-Boost 9-18VDC
(optional cable needed) |
|
- 'Sag' option to get a lower voltage. This way
you create the effect of a dying battery. |
|
Your fuzz or Tubescreamer are gonna sound
different! |
|
|
|
The shielding is well done. Put your powersupply
close to your wah and you won't notice hum! |
|
|
|
Volt:
Because the outputs are
isolated you can, by using the optional serial Y-cable, combine |
|
2x 9V
outputs to get 18 volts or even 2x 12V=24 volt.
This way you get more headroom/dynamics. |
|
The pedal must be designed for this or
being over-engineered! |
|
Warning: don't
try this with non-isolated powersupplies
because your powersupply and/or the pedal |
|
could be damaged. |
|
|
|
Milliampere: The current is measured in
milliampere (mA). |
|
Each output can handle 200 mA
maximum. Technically you can ad as many splitted powercables as |
|
you
want till you reach the point of 200 mA. |
|
Indication:
Boss Bluesdriver 13 mA,
Peterson Strobostomp 80 mA, Boss FC-200
200 mA. |
|
By using the optional parallel Y-cable you can
combine 2 outputs to get 400 mA when needed. |
|
|
 |
|
|
|
Specifications
|
|
9V DC
|
5 Outputs 9
Volt DC, 200 mA, short-circuit protected with a
current-limitation on 200 mA |
|
12V DC
|
1 Output 12
Volt DC, 200 mA, short-circuit protected with a
current-limitation on 200 mA |
|
3-9V DC
|
1 Output
variable ca. 3-9 Volt ; V = voltage, R = resistance ( 0…20
Ohm) |
|
3-12V DC
|
1 Output
variable ca. 3-12 Volt ; V = voltage, R = resistance ( 0…20
Ohm) |
|
9/12V AC
|
1 Output 9 or
12VAC*, capacity 1000 mA This output is protected with a 1AT
fuse (on the rear panel) |
|
Polarity
|
All outputs
are center negative  |
|
Fuses
|
1AT:1A-fuse
(9VAC output)
160mAT:2-160mA fuses (230 VAC fuses) |
|
Mains
|
230VAC 50/60Hz
for European power. Configurable for 120VAC/60hz for US
power |
|
Capacity
|
33 Watts max |
|
Weight
|
1960 gr |
|
Dimensions
|
(LDH)233x110x72
mm |
|
Guarantee
|
24 months |
|
|
|
Summary: you can easily
state the Burkey Flatliner can provide all your powersupply wishes.
|
|
"By far the best
powersupply you can buy nowadays". |
|
|
|
|
What's in the box? |
|
- Flatliner Power
Supply |
|
- AC power cord |
|
- 7 cables with
5.5x2.1 connectors center negative |
|
- 1 cable with
5.5x2.1 connector center positive (red connector) |
|
- 1 cable with 3.5 mm
connector for 9/12VAC output |
|
- Fuses 1x1AT
2x160mAT or 2x315mAT (115V) |
|
- Manual and Warranty
Card |
|
|
|
Price € 235
IN STOCK, new black painting
|
info@gtrgear.com
