|

(picture: front Egnater Tourmaster 4212
all tube combo)
|
|
Clean/Vintage 1 is the cleanest
of the four. |
|
Within this channel lives a range of Classic
tones ranging from pristine sparkle |
|
(with
the voicing switch set to MODERN)
to a punchy, |
|
aggressive drive (think clean JTM) in the CLASSIC
mode. |
|
|
|
Pressing the button to activate the CONTOUR
control opens an entire new range |
|
of beautiful clean, almost acoustic, tones not often found in a tube
amplifier. |
|
|
|
Clean/Vintage 2 has a very similar
voicing to the Clean/Vintage 1 channel. |
|
We’ve added more gain so this channel can be
“pushed” into mild overdrive. |
|
Sweet blues and classic rock tones are easily
coaxed out of this channel. |
|
The contour knob adds another level of unique
flavors. |
|
|
|
Overdrive
1:
From AC/DC crunch to modern rock,
this channel covers
|
|
a lot of bases all by itself.
Dial down the gain and the feel is pure classic rock.
|
|
Push the gain and enter into more modern,
saturated territory. Scoop the mids |
|
with the CONTOUR control for monstrous metal or
set it for classic British rhythm. |
|
|
|
Overdrive 2:
The Tourmaster’s most intense channel. |
|
You’ll
find ferocious gain with a wide range of tones to suit |
|
the ‘80s shredder as well as the heaviest modern metal player. |
|
Scoop the mids with the powerful CONTOUR control for massive
crunch |
|
or push the midrange for a solo tone that cuts through with
serious authority. |
|
|
|
MAIN
FEATURES |
FRONT PANEL |
|
*
100-Watt All-Tube Combo |
*
Four independent channels each with: |
|
*
2x12"
Custom-Voiced Egnater™ Elite-80 |
— Gain control |
|
Speakers
by Celestion™ |
— Master control |
|
*
Four Channels with Selectable voicing |
— Treble, Middle,
Bass |
|
*
Power Grid: Set Wattage for Each Channel |
— Classic/Modern voicing switch |
|
from 10w up
to 100w |
*
Tube driven reverb |
|
*
Tube-driven Assignable Effects Loop |
*
Master Presence |
|
*
Tube Driven Reverb |
*
Master Density |
|
*
Rugged Six-Button Footswitch |
|
|
*
Heavy
Duty Casters & Side Handles |
|
|
*
Powered by Groovetubes™ |
|
|
|
|
|
REAR PANEL |
POWER GRID |
|
*
Assignable tube driven effects loop |
*
Six preset power output levels for |
|
— Assign to channels 1&2 |
each channel from 10 to 100 watts |
|
— Assign to channels 3&4 |
*
Full or Half power switch |
|
— Assign to all four channels |
 |
|
— Assign to pedal only |
|
— Send and Return level controls |
|
— Selectable series or parallel |
|
*
Cabinet voiced line/recording out |
|
*
Simple master bias adjust with test points |
|
|
|
Power Grid:
This is a really cool feature your will only find on the Egnater
Tourmaster™ amps. |
|
Using a group of 5 slide switches on the rear
panel, you can set the power output for each channel |
|
individually. There is a 3
position slide switch corresponding to each of the four channels
and a |
|
single FULL POWER/ HALF POWER slide switch.
|
|
In FULL POWER mode you can choose between 100w,
50w or 25w per channel. |
|
In the HALF POWER mode you can between choose
50w, 25w or 10w per channel. |
|
 |
|
With the Tourmaster you not only have a wide
array of tones available from the preamp channels, |
|
but with the Power Grid you can introduce any
amount of power tube distortion you wish to each
|
|
channel, all preset and automatic. |
|
|
|
|
|
 |
 |
|
Heavy
duty detachable casters
|
Custom-voiced
Egnater™ Elite-80
|
|
and metal side handles. |
speakers from Celestion™ |
|
|
|
|
WHAT'S UNDER
THE HOOD
|
|
Output
Power: |
10 to
100 Watts RMS Presetable |
|
Output
Impedance: |
4
Ohms, 8 Ohms Or 16 Ohms - Selectable |
|
Preamp
Tubes: |
Eight
Selected Groovetubes™ /
|
|
|
Egnater™12AX7A / ECC83 |
|
Output
Tubes: |
Four
Selected Groovetubes™ /
|
|
|
Egnater™ 5881 |
|
Density: |
+6db @
120hz |
|
Presence: |
+8db @
3.2khz |
|
Record Output Level: |
-50dBv To 0dBv |
|
Dimensions: |
70 (L)
x 28 (B) x 27 (H) (centimeters) |
|
|
27.5 (W) x 11 (D) x 22 (H)
(inches) |
|
Weight: |
43 kg / 95
lbs |
|
|
|
|
|
|
|
|
|
Price
€1790,-
IN STOCK,
order here |
|
flat rate shipping in EU €99,
insured & track&trace |
|
|