|
-
Musically
shifting of overall frequency balance. |
|
-
NOT
a typical boost/cut treble control. |
|
- Bi-color
LED. |
|
-
Provides
visual indication of depth of compression. |
|
- Battery
or standard negative tip 9V-24V DC adapter
operation. |
|
- True
bypass signal path. |
|
|
|
Trick #1 |
 |
|
For the tone purists: this switch
inserts |
|
or removes the tilt EQ from the signal path. |
|
|
|
The switch can be accessed by
removing the back. |
|
It's a small slide switch on the PC
board. |
|
|
|
Trick #2 |
 |
|
Inserts or removes a 4.8 kHz, 6 dB/octave
lowpass/hi-cut filter from |
|
the signal path. This will help reduce any audible
amplification |
|
of low level white noise by subsequent high gain stages. |
|
|
|
Move the jumper from the bottom and
middle pins (hi-cut filter out) |
|
to the middle and upper pins (hi-cut
filter in). |
|
|
|
Sample Settings |
|
Manual |
info@gtrgear.com
